RJC Fury R1 Design Build Drive Gallery Video Contact Me Misc
Last page update was 29 Oct 2004

Fisher Fury Build Progress - February 2004

13th February

Last week Richard  sold his Striker to another colleague at work. He had only just recently had it dynoed at 172bhp at 10,000rpm and dropping off a fair bit above that. A non-baffled exhaust would increase this further. Torque was 80lb-ft and never dropped below the mid 60's (which is where a blade peaks), until below 4000rpm.

My job for the next few months is to finalise my design and costs, identify all the suppliers and work out any questions and issues I have. This alone is going to take a few months but it should save me loads of time when it comes to sitting in the garage and actually bolting things together.

Bought a Yamaha R1 2002 mint exhaust silencer with catalyst on eBay for 74 inc. P&P.

I've been asked to work in London for the next 3-4 months so my whole life is very much on hold.

RJC Fury R1 Design Build Drive Gallery Video Contact Me Misc
Copyright © Robert Collingridge 2004